Unit barcode, case barcode: two different numbers
The UPC or EAN on a single product tells a till what to charge. It is no use to a warehouse receiving a pallet, because a case of 12 scanned as "one unit" throws the stock count out by 11. So each case size gets its own 14-digit number, the GTIN-14, and ITF-14 is the barcode that carries it on the carton.
How to build a GTIN-14 from a UPC or EAN
- Start with the unit number without its check digit. For UPC
012345000065that is01234500006. - Pad to 12 digits with zeros on the left. A UPC gains one zero:
001234500006. An EAN-13 already has 12. - Put a packaging indicator in front. Choose 1 to 8. This gives 13 digits:
1001234500006. - Calculate a new check digit. Type the 13 digits above and it is added, giving
10012345000062.
The new check digit is almost never the same as the one on the unit. Copying the old one across is the most common mistake in carton labelling, and it produces a barcode that will not scan at all. If you want to see the sum, the check digit calculator shows the working for 13-digit input.
Choosing the packaging indicator
| Indicator | Meaning |
|---|---|
| 0 | The case is itself the sale unit, or a mixed case |
| 1 to 8 | A standard case of identical units. Use a different digit for each pack size. |
| 9 | Variable measure, such as a case sold by weight |
The digits 1 to 8 carry no fixed meaning. By convention, sellers use 1 for the inner pack, 2 for the next size up, and so on. What matters is that a case of 6 and a case of 12 never share a number.
Why ITF-14 and not a bigger UPC?
ITF stands for Interleaved 2 of 5. Its bars are thick and widely spaced, which lets it be printed directly onto rough brown corrugated board by flexographic presses that could never hold the fine lines of a UPC. The bearer bars around it protect against the two things that go wrong on cardboard: uneven plate pressure and partial scans.
Size and placement on the carton
- Size: about 142.75 mm by 32 mm for the bars at 100%. Printed on a white label, 50% to 100% is widely accepted. Printed on board, keep it at 100%.
- Quiet zone: ten narrow-bar widths of clear space left and right, inside the bearer bar.
- Position: on at least one side of the carton, ideally two adjacent sides, with the bottom of the bars 32 mm from the base and at least 19 mm from any vertical edge.
- Colour: black on white or black on brown board. Avoid printing across a tape seam.
When a retailer asks for more than a GTIN
If the carton label also has to carry a lot number, a best-before date or a count, ITF-14 cannot do it. That is the job of GS1-128, which holds the same GTIN-14 plus those extra fields. For the unit barcodes that go inside the case, use the UPC generator or the EAN-13 generator.